The effects of support plate thickness on the drilling machinability of CFRP

Basit Öğe Kaydı
dc.authorid0000-0002-9205-9768
dc.authorid0000-0002-6271-0804
dc.contributor.authorBetgül, Çağlar
dc.contributor.authorKöklü, Uğur
dc.contributor.authorMorkavuk, Sezer
dc.date.accessioned2024-01-22T12:22:22Z
dc.date.available2024-01-22T12:22:22Z
dc.date.issued2023
dc.departmentKMÜ, Mühendislik Fakültesi, Makine Mühendisliği Bölümüen_US
dc.description.abstractWhen carbon fiber reinforced plastics (CFRP) are drilled, delamination damage occurs at the hole entry and exit. An important method to reduce delamination at the hole exit is using a support plate. Therefore, sustainable drilling of CFRP to reduce the delamination damage is promising for modern industries. In this study, the effect of drilling CFRP composite plates using support plates of different thicknesses on thrust force, delamination, and borehole surface quality was experimentally investigated. The results showed that the thrust force increased as the support plate thickness increased at low spindle speed, but the support plate thickness did not significantly affect the thrust force at high spindle speed. While severe delamination damage occurred at the hole exit in the tests without the use of support, delamination damage was significantly reduced in the case of using a support plate. On the other hand, the severity of the damages decreased as the support plate thickness increased, especially unless very high feed rates were chosen. Consequently, the thickness of the support plate considerably influences the damage formation and severeness of the damages is significantly reduced when a support plate with sufficient thickness is used.en_US
dc.description.sponsorshipCommission of Scientific Research Projects of Karamanoglu Mehmetbey University, Karaman-Turkey [22-YL-20]en_US
dc.description.sponsorshipThe author(s) disclosed receipt of the following financial support for the research, authorship, and/or publication of this article: This work was supported by Commission of Scientific Research Projects of Karamanoglu Mehmetbey University, Karaman-Turkey (Project No. 22-YL-20).en_US
dc.identifier.citationBetgül, Ç., Köklü, U., & Morkavuk, S. (2023). The effects of support plate thickness on the drilling machinability of CFRP. Journal of Reinforced Plastics and Composites. https://doi.org/10.1177/07316844231218942en_US
dc.identifier.doi10.1177/07316844231218942
dc.identifier.issn0731-6844
dc.identifier.issn1530-7964
dc.identifier.scopus2-s2.0-85178070792
dc.identifier.scopusqualityQ1
dc.identifier.urihttps://doi.org/10.1177/07316844231218942
dc.identifier.urihttps://hdl.handle.net/11492/7940
dc.identifier.wosWOS:001119784400001
dc.identifier.wosqualityQ3
dc.indekslendigikaynakWeb of Sceince
dc.indekslendigikaynakScopus
dc.institutionauthorBetgül, Çağlar
dc.institutionauthorKöklü, Uğur
dc.institutionauthorMorkavuk, Sezer
dc.language.isoen
dc.publisherSage Publications Ltd.en_US
dc.relation.journalJournal of Reinforced Plastics and Compositesen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectBackupen_US
dc.subjectSupport Plateen_US
dc.subjectDrillingen_US
dc.subjectCFRPen_US
dc.subjectDelaminationen_US
dc.titleThe effects of support plate thickness on the drilling machinability of CFRPen_US
dc.typeArticle

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
[ X ]
İsim:
Betgül, Çaglar.pdf
Boyut:
3.69 MB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin / Full Text
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Mühendislik Fakültesi, Makine Mühendisliği Bölümü, Makale Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu