Effects of various helically angled grinding wheels on the surface roughness and roundness in grinding cylindrical surfaces

Basit Öğe Kaydı
dc.authorid0000-0002-9205-9768en_US
dc.contributor.authorGavas, Muammer
dc.contributor.authorKına, Muammer
dc.contributor.authorKöklü, Uğur
dc.date.accessioned2019-12-06T21:17:04Z
dc.date.available2019-12-06T21:17:04Z
dc.date.issued2015
dc.departmentKMÜ, Mühendislik Fakültesi, Makine Mühendisliği Bölümüen_US
dc.descriptionWOS:000366552500003en_US
dc.description.abstractGrinding is generally used in the final step of machining metallic materials to achieve the necessary surface quality and dimensions. Grinding wheels with flat surfaces are commonly used in the process of grinding. However, due to the fact that there is a great deal of contact length (corresponding to the grinding-wheel width) between the grinding wheel and the workpiece, effective cooling during the grinding process may not be possible and, consequently, the heat in the deformation region is increased. Due to these reasons, some undesired results such as an unqualified surface and a roundness error take place. Various profiles of the grinding wheel were, therefore, proposed to improve the surface quality and decrease the roundness error by modifying the grinding wheel and developing various methods. In this study, AISI 1050, AISI 4140 and AISI 7131 steel materials were subjected to the cylindrical-grinding process using wheels helically grooved at 15 degrees, 30 degrees and 45 degrees and the obtained results such as the average surface roughness and roundness errors were compared with the results of the flat-surface grinding wheels. The experimental results show that the surface roughness and roundness error are reduced when using a helically grooved grinding wheel and, thus, the quality of the machined parts is improved.en_US
dc.identifier.citationGavas, M., Kına, M., Köklü, U. (2015). Effects of various helically angled grinding wheels on the surface roughness and roundness in grinding cylindrical. Materiali in Tehnologije, 49.
dc.identifier.doi10.17222/mit.2014.065
dc.identifier.endpage870en_US
dc.identifier.issn1580-2949
dc.identifier.issn1580-3414
dc.identifier.issue6en_US
dc.identifier.scopus2-s2.0-84953711123
dc.identifier.scopusqualityQ3
dc.identifier.startpage865en_US
dc.identifier.urihttps://dx.doi.org/10.17222/mit.2014.065
dc.identifier.urihttps://hdl.handle.net/11492/3046
dc.identifier.volume49en_US
dc.identifier.wosWOS:000366552500003
dc.identifier.wosqualityQ4
dc.indekslendigikaynakWeb of Sceince
dc.indekslendigikaynakScopus
dc.institutionauthorKöklü, Uğur
dc.language.isoen
dc.publisherInst Za Kovinske Materiale I In Tehnologieen_US
dc.relation.journalMateriali In Tehnologijeen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectCylindrical Grindingen_US
dc.subjectHelically Grooved Grinding Wheelen_US
dc.subjectRoundness Erroren_US
dc.subjectSurface Roughnessen_US
dc.titleEffects of various helically angled grinding wheels on the surface roughness and roundness in grinding cylindrical surfacesen_US
dc.typeArticle

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim
İsim:
Gavas, Muammer 2015.pdf
Boyut:
1.15 MB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin/Full Text
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Mühendislik Fakültesi, Makine Mühendisliği Bölümü, Makale Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu