Experimental investigation of the effect of specially manufactured blank (SMB) materials on deep drawing

Basit Öğe Kaydı
dc.authorid0000-0002-9205-9768en_US
dc.contributor.authorDağtekin, Emrah
dc.contributor.authorGavas, Muammer
dc.contributor.authorKöklü, Uğur
dc.date.accessioned2022-08-05T08:32:48Z
dc.date.available2022-08-05T08:32:48Z
dc.date.issued2022en_US
dc.departmentKMÜ, Mühendislik Fakültesi, Makine Mühendisliği Bölümüen_US
dc.descriptionWOS:000822086200001en_US
dc.description.abstractDeep drawing, one of the sheet metal forming processes, has a large area of use in industry. In the deep drawing, sheets having a fixed thickness are usually deep drawn. In general, there are some limitations, which prevent the part from being drawn at the desired depth, in the deep-drawing processes. Some of these consist of the increase in the sheet thickness towards the end of the part, being exposed to ironing, increasing wrinkles, exposure of the material to deformation hardening, and as a result, the fractures occur in the drawn part. Many special methods have been developed to increase the drawing height. One of them is to use blanks having machined edges. In the present study, the edges of the blank material were thinned by using the turning process at certain angles to avoid the above-mentioned negative effects. In this study, Al-1050 aluminum alloy with a thickness of 2 mm and machined edges of 1°, 2°, 3°, and 4° were used. The results were compared with the unmachined blanks. The highest drawing height was obtained with the blank having a 1° machined edge and 95 mm diameter. In addition, the power (approximately 7–31%) needed for deep drawing and material weight were reduced with the help of the deep-drawing process applied by using a specially manufactured blank.en_US
dc.identifier.citationDağtekin, E., Gavas, M., Köklü, U. (2022). Experimental investigation of the effect of specially manufactured blank (SMB) materials on deep drawing. Proceedings Of The Institution Of Mechanical Engineers Part E-Journal Of Process Mechanical Engineering.en_US
dc.identifier.doi10.1177/09544089221112379
dc.identifier.issn2041-3009
dc.identifier.scopus2-s2.0-85133845613
dc.identifier.scopusqualityQ2
dc.identifier.urihttps://doi.org/10.1177/09544089221112379
dc.identifier.urihttps://hdl.handle.net/11492/6489
dc.identifier.wosWOS:000822086200001
dc.identifier.wosqualityQ3
dc.indekslendigikaynakWeb of Sceince
dc.indekslendigikaynakScopus
dc.institutionauthorKöklü, Uğur
dc.language.isoen
dc.publisherSage Publications Ltden_US
dc.relation.journalProceedings Of The Institution Of Mechanical Engineers Part E-Journal Of Process Mechanical Engineeringen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectSpecially Manufactured Blanken_US
dc.subjectAngle Machined Blanken_US
dc.subjectDeep Drawingen_US
dc.subjectDrawing Heighten_US
dc.titleExperimental investigation of the effect of specially manufactured blank (SMB) materials on deep drawingen_US
dc.typeArticle

Dosyalar

Lisans paketi
Listeleniyor 1 - 1 / 1
[ X ]
İsim:
license.txt
Boyut:
1.44 KB
Biçim:
Item-specific license agreed upon to submission
Açıklama:
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Mühendislik Fakültesi, Makine Mühendisliği Bölümü, Makale Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu