Effects of the drill flute number on drilling of a casted AZ91 magnesium alloy

Basit Öğe Kaydı
dc.authorid0000-0002-9205-9768en_US
dc.authorid0000-0002-6271-0804en_US
dc.contributor.authorKöklü, Uğur
dc.contributor.authorMorkavuk, Sezer
dc.contributor.authorUrtekin, Leveni
dc.date.accessioned2019-12-06T21:15:12Z
dc.date.available2019-12-06T21:15:12Z
dc.date.issued2019
dc.departmentKMÜ, Mühendislik Fakültesi, Makine Mühendisliği Bölümüen_US
dc.descriptionWOS:000460131000010en_US
dc.description.abstractThis experimental study aims to reveal the effect of the drill flute number on the thrust force, tool wear, tool life, chip morphology, surface hardness and microstructure in the drilling of a cast AZ91 magnesium alloy. The results showed that the cutting flute number and cutting parameters have an important effect on thrust force, tool life, wear, chip morphology, microstructure, and drilled hole hardness. When the 2-flute drill was used, less thrust force was generated during the drilling. On the other hand, less tool wear occurred with the 3-flute drill. In scanning electron microscopy (SEM) microstructural analyses, grain refinement was observed in the microstructure of the borehole surface although grain growth was also observed due to a rise in temperature. In addition, the microhardness of the borehole surface decreased as the number of holes increased, and the 2-flute drill bit provided holes with higher stiffness than the 3-flute drill bit.en_US
dc.identifier.citationKöklü, U., Morkavuk, S., Urtekin, L. (2019). Effects of the drill flute number on drilling of a casted AZ91 magnesium alloy. Materialprüfung, 61, 3, 260-266.
dc.identifier.doi10.3139/120.111315
dc.identifier.endpage266en_US
dc.identifier.issn0025-5300
dc.identifier.issue3en_US
dc.identifier.scopus2-s2.0-85063200587
dc.identifier.scopusqualityQ2
dc.identifier.startpage260en_US
dc.identifier.urihttps://dx.doi.org/10.3139/120.111315
dc.identifier.urihttps://hdl.handle.net/11492/2484
dc.identifier.volume61en_US
dc.identifier.wosWOS:000460131000010
dc.identifier.wosqualityQ4
dc.indekslendigikaynakWeb of Sceince
dc.indekslendigikaynakScopus
dc.institutionauthorKöklü, Uğur
dc.institutionauthorMorkavuk, Sezer
dc.language.isoen
dc.publisherCarl Hanser Verlagen_US
dc.relation.journalMaterialprüfungen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectNumber Of Flutesen_US
dc.subjectCasted AZ91 Magnesium Alloyen_US
dc.subjectTool Lifeen_US
dc.subjectWearen_US
dc.subjectForceen_US
dc.titleEffects of the drill flute number on drilling of a casted AZ91 magnesium alloyen_US
dc.typeArticle

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
[ X ]
İsim:
Köklü, Uğur 2019.pdf
Boyut:
1.4 MB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin/Full text
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Mühendislik Fakültesi, Makine Mühendisliği Bölümü, Makale Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu